Suzue 15mm to 12mm Thru-Axle Converter , Length 152mm, Soma Wolverine Unicrown Fork V1 / MTB Fork
• Please look over our
updated shipping terms
• "Add to Cart" button will not allow out-of-stock items to be ordered.
15mm to 12mm thru-axle converter kit for the version 1 unicrown fork for the Soma Wolverine frame (Will not fit the version 2 or 3 which use a shorter axle.) and also for the Soma MTB Thru-Axle rigid fork.
• Length: 152mm
• Thread pitch: 1.5mm
• Thread length: 17mm
• Thru Hole Insert: 15mm OD x 12mm ID, 24mm long
• Axle: 12mm x 152mm long, M12x1.5mm threads
Installation Notes:
1. Use either grease or low-strength threadlocker on thread adapter
2. Use Park Tool SPA-2 or equivalent 2.3mm pin spanner to tighten thread adapter into fork. Flange goes on the OUTSIDE (see third picture).
3. Use grease on o-ring of thru hole insert and install into fork from the outside with a combined pushing and twisting motion. Do NOT use thru axle to drive thru hole insert into the fork.
4. Use grease on threads of thru axle. Torque 9 - 13.5 N*m using 5mm hex key.